Loose Loop Print & Apply Labeler applying labels to stacks of paper cups

This Series 5 Re-Pack system prints desired information onto the label using a completely integrated thermal transfer technology desktop style label printer. Once fully printed, the label is then wrap applied around the base of the cup stack via direct wipe on application that is completed using an independently drivenWrap station.

High Speed Top & Bottom Labeling System

This video shows two high speeds Series 4 labeling applicators applying labels to the top and bottom of a single passing item. In this case the top label is a clear hang tab that can be seen at the end of the video. The square bottom label is applied through the small space between the […]

High Speed Servo Motor Driven Beverage Labeling System

In this video the Series 4 High Speed Beverage Labeling System is applying labels to round beverage containers at high throughput rates. The accuracy of the container handling is insured through the use of a timing screw. This timing screw insures the high speed location of the container in relation to the labeling head for […]

Ultra High Speed Labeler For Newspapers

  This ultra high speed Series 4 labeler for newspapers was specifically designed to serve the needs of the newspaper publishing industry to affix marketing labels to the front page of newspapers. Labels are supplied to the labeler from boxes instead of the normal label roll. This system can apply up to 400 labels per […]

3 Panel Carton Labeling Using Innovative Hugger Belt Transport

Items that don’t stand easily and reliably can often require unique methods of transport for label application. A pair of opposing hugger belts can solve many such problems. A narrow box of playing cards is gently held by the side hugger belts while a single label is applied to the front panel and then is […]

2 Panel Carton Labeling On Hard To Reach Carton Surfaces

Sometimes the way an item is being transported along the packaging line can make applying a label to certain panels of a carton difficult. If a label is required on the bottom panel of a carton a unique transport method may be necessary. Side hugger belts can solve many of the challenges of this application. […]

Printing And Applying Labels To The Inside Of A Pipe

In this video an integrated OEM print engine, that can print the complete information content of a label up to 4” wide, prints the entire label. The label is then transferred to a vacuum pad on the end of a cylinder. The vacuum pad is inserted into the pipe where the label is blown onto […]

Labeling System Printing And Applying Very Small Labels To Very Small Parts

This video shows the creativity of our Series 6 labeling engineers in designing a system to print a very small label and apply it to a very small part. This need was made even more difficult as the label orientation during printing did not match the orientation of the part and, thus, the label had […]

Print And Apply Semi-Automatic – Table Top Off-Line Carton Labeling

  The Series 6 Print and Apply Labeling System can be fully integrated with a packaging line or can be set up as a standalone, manually fed, semi- automatic unit. Cartons can be fed by hand onto a locating table that insures the proper alignment of the carton and accurate placement of the label. This […]

Print And Apply A Label To A Carton Without Ever Touching The Carton

Applying labels to cartons that are moving at high speed along a packaging line by contacting the carton can create problems for the alignment of the carton and also for the equipment applying the label. The safest way to apply a printed label in this type of situation is to NEVER touch the carton but […]

Print & Apply Labels To The Front And Top – Panels Of A Moving Carton

Labels can be printed right on-line and applied to cartons on any surface of the carton while it is in motion. This video demonstrates an application method that applies the two panel label to the front and top panels of the moving carton. The label is wrapped around the desired corner of the carton to […]

Basic Print & Tamp Application of A Top Panel Label

This video shows the Re-Pack Series 6 Print & Apply Labeling System in a basic top mounted print & apply installation. The label is fully printed immediately prior to being applied. The applicator vacuum tamp pads can be custom sized to fit almost any label size need. Labeler installation can be from the top, bottom, […]

Carton Labeling – Identification On All Four Sides

A specific customer request led to the development of this four side labeling system. Two corner wrap labels, one leading edge label and one trailing edge label, are printed and applied as part of a single fully integrated labeling process. The finished carton can be visually identified from any side view no matter how it […]

Customizable Carton Labeling Machinery from Griffin-Rutgers

All of the labeling machines we sell are constructed with a modular, open frame design allowing us to customize and modify the label applicators as needed. At times, an application will be so unusual, that modified equipment will not fill the customer’s needs. In these cases, we will design and manufacture a piece of labeling […]

Labeling Machinery for Tapered Containers from Griffin-Rutgers

  This label applicator is designed to wrap labels around tapered containers. The application requires that a “Banana cut” style label is used to match the taper of the container. We have overcome the label skew issue by partially pre-dispensing the label and finishing the application at the wrap station.

Tamper Evident Seal Application To Cartons At Up To 80 Cartons Per Minute

The Re-Pack Tamper Evident Labeling Systems are specifically designed to apply security seals to cartons and other types of packaging in order to secure their contents. This is accomplished by applying a pressure sensitive security seal to one panel and then folding the remainder of the security seal around the corner of the opening panel […]

The Robo Wrap Applicator For Small Diameter Products And Containers

The Re-Pack Robo Wrap label applicator is designed to label round products ranging from quarter inch O.D. up to three inch O.D. The product is placed into an in-feed chute by hand or automatic feed. As the product exits the chute, it is transferred to an indexing starwheel for accurate controlled transport. The starwheel then […]

Labeling Break Top Pharma Ampoules

This video is a demonstration of the small item labeling capability of the Robo Wrap System. This compact, table top designed labeling system is able to hold very small cylindrical items in close control so that accurate label placement is achieved consistently. Numerous options are available to customize this system for installation in pharmaceutical manufacturing […]

Labeling Pharma Vials Of Different Sizes

This video is a demonstration of the small item labeling capability of the Robo Wrap System. This compact, table top designed labeling system is able to hold small cylindrical vials in close control so that accurate label placement is achieved consistently. Numerous options are available to customize this system for installation in pharmaceutical manufacturing environments […]

Versatile Table Top Labeling Systems

We offer a wide variety of table top labeling devices. This machine equipped with a tamp type applicator is perfectly suited for containers that have unusual shapes and may be difficult to handle. With standard features such as removable tamp pads and adjustable product fixtures, the tabletop tamp is versatile and easy to change over. […]

Mini Wrap Beverage Bottle Labeler

Here it is applying pre-printed labels to traditional brown glass beverage bottles. The Mini Wrap is the perfect labeling system for low to medium volume labeling operations. It is also perfect for new startup companies that want to grow their production volume into the full use of such a labeling system by moving it in-line […]

Long Label Application Using A Mini Wrap Labeling System

This is another demonstration of the versatility of the Mini Wrap Labeling System. This video shows a 23″ long pre-printed label being wrap applied to a large plastic container with the Mini Wrap Labeling System. The Mini wrap is a highly versatile and economical labeling system that can be customized to a specific task or […]

Mini Wrap Labeling Larger Containers

This video is one of a series that we have posted showing the versatility of the Mini Wrap Labeling System. Be sure to view the others also. In this video, the system is applying pre-printed labels to large plastic cylindrical containers with the Large Frame version of the Mini Wrap System. This unit has a […]

Mini Wrap With Hot Stamp Coder & Reject Station

This video is one of a series that we have posted showing the versatility of the Mini Wrap Labeling System. Be sure to view the others also. The integrated hot stamper of this Mini Wrap System is printing variable information onto pre-printed labels, which are then applied to small bottles. When a bottle not meeting […]

Mini Wrap Labeling Square Glass Jars

This video is one of a series that we have posted showing the versatility of the Mini Wrap Labeling System. Be sure to view the others also. This video shows the system applying wrap labels to square glass jars. The Mini Wrap is designed to fill the gap between semi-automatic labeling machines and fully automatic […]

Mini Wrap Labeler Labeling Aerosol Cans

This video is one of a series that we have posted showing the versatility of the Mini Wrap Labeling System. Be sure to view the others also. This video shows the system applying wrap labels to metal aerosol cans. The Mini Wrap is designed to fill the gap between semi-automatic labeling machines and fully automatic […]

Mini Wrap Labeling System – Perfect For Low-Medium Volume And Startup Operations

The Mini Wrap is designed to fill the gap between semi-automatic labeling machines and fully automatic label applicators. Competitively priced with semi-automatic units, it is well constructed with a small footprint and has many features that are found on full framed wrap systems. This video is one of a series that we have posted showing […]

Labeling Machinery for Tapered Containers from Griffin-Rutgers

This label applicator is designed to wrap labels around tapered containers. The application requires that a “Banana cut” style label is used to match the taper of the container. We have overcome the label skew issue by partially pre-dispensing the label and finishing the application at

Three Panel Labeling Applicators from Griffin Rutgers

Three panel label applications on square and rectangular cases have become common place and we offer a line of labeling machines specifically for these applications. We even have a machine that can quickly be changed over from 3 panel to single panel or wrap label application. Labeling applicators are great for boxes and cartons, round […]

Customizable Carton Labeling Machinery from Griffin-Rutgers

All of the labeling machines we sell are constructed with a modular, open frame design allowing us to customize and modify the label applicators as needed. At times, an application will be so unusual, that modified equipment will not fill the customer’s needs. In these cases, we will design and manufacture a piece of labeling […]

Griffin Rutgers Presents the Robo-Wrap Applicator

The Re-pack Robo Wrap label applicator is designed to label round products ranging from a quarter inch O.D. to a three inch O.D. The product is placed by hand into an in-feed chute. As the product exits the chute, it is transferred to an indexing starwheel. The starwheel then rotates the product to the labeling […]

Griffin Rutgers Presents the Table Top Tamp

We offer a wide variety of table top labeling machinery. This machine is perfectly suited for containers that have unusual shapes and may be difficult to handle.  With standard features such as removable tamp pads and adjustable product fixtures, the tabletop tamp is versatile and easy to change over. The low purchase price and simple […]